SECOND HAND MACHINE

SECOND HAND MACHINE

Stock Preparation Equipment > Deinking Equipments

SC-16001

~~Deinking line 100tpd~~ SOLD

The deinking line is based on a modern process, with a nominal capacity of 85 t/day with a max of 100 t/day. The equipment is in excellent condition, mainly in stainless steel with valves, instrumentation, electrical panels. The line is complete from pulper to machine chest, and in running condition. The main process equipment is manufactured by LAMORT, which is one of the leaders for deinking process. Deinking line was delivered: 1989 – 1990 Power supply: 50 Hz, Voltage: 500 V Raw material: newsprint, magazines, woodfree papers 100% Brightness after processing: 60 – 80 ° depending on the raw material Delta Brightness: 11 – 15 ° after disperging and bleaching The main process equipment is listed hereinafter as follows:
1^st stage - Repulping
ITEM 1: ONE WEIGHING CONVEYOR: Position : Feeding for helico Pulper Length : 40 m (loading area 10m) Width : 1700 mm Weighing : 6 cells with control panel Capacity : 10 tons Motor : 15 kW Support – frames : One set

ITEM 2: ONE HELICO PULPER: Volume : 15 m3 Consistency : 17% Production : 6t/h (144 t/d) Batch time : 15 mm Vat dimensions : Height : 2 350 mm Diameter : 3 616 mm Rotor dimensions : Height : 1 445 mm Diameter : 1 500 mm Turbine pales : 3 to 120° Motor : 315 kW Gearbox : Included Tank : Stainless steel Dust extractor : Included with drive 1,5 kW Consistency Regulation : Included : ø200 Ball valve Pulper cover : Included Automatic discharge valve : ø400 m/m
ITEM 3: ONE WHITE WATER HEATED TANK: Material : Stainless steel Heating system : 2,2 Ba
ITEM 4: ONE CHEMICAL DOSING SYSTEM: Dosing tanks : 5 Capacity : 1m3/each Material : Stainless steel Products : NaOH : H2O2 : NaSiO5 : DTPA : H2SO4 Automatic dosing valves : Included
ITEM 5: ONE DETRASHER: Capacity : 600 m3/h Body sizes : Length : 1 085 mm Diameter : 1 516 mm Drilled plate : Diameter : 1 300 mm Holes dia : 8 mm Foils : Diameter : 1 300 mm 3 blades at 120° Motor : 55 kW Automatic sas reject : 600 m/m Reject separator : Included
ITEM 6: ONE DISCHARGE PUMP: Capacity : 540 m3/h Consistency : 5% Motor : 75 kW
ITEM 7: ONE STORAGE TANK: Capacity : 100 m3 Construction : Concrete Agitator : Included Material : Stainless steel Motor : 37 kW
ITEM 8: ONE TRANSFER PUMP: Capacity : 90 m3 Consistency : 5% Motor : 15kW
ITEM 9: ONE MIXING TANK: Capacity : 20 m3 Construction : Concrete Agitator : Included Material : Stainless steel Motor : 7,5 kW
ITEM 10: ONE TRANSFER PUMP: Capacity : 160 m3/h Consistency : 3,3% Dilution system : Ball valve : ø80 automatic Motor : 37 kW

2^nd stage - Screening

ITEM 11: TWO HIGH DENSITY CLEANERS: Manufacturer : LAMORT Type : LA 200 Size : 1 800 Pressure : 2 bar Unit capacity : 120 m3/h Automatic reject system : Included
ITEM 12: ONE PRESSURE SCREEN: Position : Primary stage Type : SPN Manufacturer : LAMORT Basket : Holes dia : 1,5 mm CAE Macroflow Production : 130 t/d Motor : 90 kW Material : Stainless steel
ITEM 13: ONE PRESSURE SCREEN: Position : Reject from SPN 1^st stage Manufacturer : LAMORT Production : 60 t/d Basket : Holes dia : 1,5 mm CAE Macroflow Motor : 45 kW Material : Stainless steel
ITEM 14: ONE CONSTANT LEVEL BOX: Material : Stainless steel
ITEM 15: ONE FEEDING PUMP (Stage 1): Capacity : 360 m3/h Consistency : 1,16% to 1,3% Dilution system : Ball valve : ø150 Automatic Motor : 37 kW

3^rd stage - FLOTATION

ITEM 16: ONE DE-INKING CELL (First stage): Manufacturer : LAMORT Type: VERTICELL 5 Volume : 21 m3 Consistency : 1,2% 1^st aeration : 12 injectors Counter aeration : 18 injectors Flow : ± 500 m3/h Recycling pump : Included
ITEM 17: ONE FEEDING PUMP (For Second stage): Capacity : 350 m3/h Consistency : 1,16% to 1,5% Motor : 75kW
ITEM 18: DEINKING CELL (Second stage): Manufacturer : LAMORT Type: VERTICELL 5 Volume : 21 m3 Consistency : 1,2% 1^st aeration : 12 injectors Counter aeration : 18 injectors Flow : ± 500 m3/h Recycling pump : Included
ITEM 19: ONE FEEDING PUMP: Capacity : 350 m3/h Consistency : 1,1% to 1,2% Motor : 30kW
ITEM 20: ONE DILUTION PUMP: Capacity : 115 m3/h Consistency : 1,1% Motor : 18,5 kW
ITEM 21: ONE STORAGE TANK: Capacity : 50 m3 Construction : Concrete Agitator : Included Material : Stainless steel Motor : 11 kW

4^th stage – CLEANING

ITEM 22: ONE FEEDING PUMP (Cleaners first stage): Capacity : 600 m3/h Consistency : 1% Motor : 90 kW
ITEM 23: ONE SET OF LOW DENSITY CLEANERS: Stages : 4 Type : Canister Elast-O-Cone ELP 136 1^st stage : 81 units 2^nd stage : 19 units 3^rd stage : 7 units 4^th stage : 3 units Inlet pressure : 1,6 bar Consistency : 0,94% Vessels : Stainless steel
ITEM 24: ONE CLEANER REJECT TANK: Material : Stainless steel Overflow : Included
ITEM 25: ONE FEEDING PUMP: Position : Cleaners stage 2 Capacity : 170 m3/h Consistency : 0,57% Motor : 18,5 kW
ITEM 26: ONE FEEDING PUMP: Position : Cleaners stage 3 Capacity : 56 m3/h Consistency : 0,47% Motor : 7,5 kW
ITEM 27: ONE FEEDING PUMP: Position : Cleaners stage 4 Capacity : 15 m3/h Consistency : 0,40% Motor : 7,5 kW
ITEM 28: ONE LOW DENSITY CENTRISCREEN: Stage : n°1 Manufacturer : LAMORT Type : SPN Size : 10 Capacity : 561 m3/h Consistency : 0,80% Production : 250 t/d Basket : Slotted at 0,15 mm Motor : 37 kW
ITEM 29: ONE LOW DENSITY CENTRISCREEN: Stage : n°2 Manufacturer : LAMORT Type : CH Size : 3A Capacity : 56 m3/h Consistency : 0,80% Production : 15 t/d Basket : Slotted at 0,25 mm Motor : 22 kW
ITEM 30: ONE FEEDING PUMP (Gyroclean): Capacity : 500 m3/h Consistency : 0,80% Motor : 110 kW
ITEM 31: SCREENING SYSTEMS FOR LIGHT CONTAMINANTS: Manufacturer : LAMORT Type : Gyroclean G5 Inlet pressure : 1,6 bar Inlet consistency : 1,5% Flow : maxi 400 m3/h each Material : Stainless steel Motor : 30 kW Vacuum pump : Included Motor : 11 kW Separator : Included

5^th stage – Washing, disperging and bleaching – Not included in the scope of delivery – is it possible to buy in the separate deal.

ITEM 32: ONE DISC FILTER: Not included in scope of delivery Size : 3 660 mm Disk number : 8 Total surface : 128 m2 Inlet consistency : 1,2% Oulet consistency : 16% Motor : Drive : 5,5 kW Roll : 0,25 kW Shower : Included Motor 1,5 kW Repulper : Included Motor 5,5 kW Vacuum pump : Included Motor : 55 kW Separator : Included Material : Stainless steel
ITEM 33: ONE PULP SCREW CONVEYOR: Not included in scope of delivery Material : Stainless steel Type : Inclined Motor : 5,5 kW
ITEM 34: ONE HD PULP CONVEYOR: Not included in scope of delivery Type : Horizontal Motor : 2,2 kW Material : Stainless steel
ITEM 35: TWO PULP HD SCREW PRESSES: Not included in scope of delivery Manufacturer : LAMORT Inlet consistency : 15% Oulet consistency : 34% Capacity : 70 t/day each Motor : 30 kW
ITEM 36: ONE PULP SCREW CONVEYOR: Not included in scope of delivery Type : Horizontal Material : Stainless steel Motor : 2,2 kW
ITEM 37: ONE HOT DISPERGING SYSTEM: Not included in scope of delivery Manufacturer : LAMORT Regulations : temperature and power Production : 120 t/d Motor : 315 Kw Feed chute : Included Steam heating system : Included
ITEM 38: ONE PULP SCREW CONVEYOR: Not included in scope of delivery Type : Inclined Material : Stainless steel Motor : 7,5 kW
ITEM 39: ONE WHITE WATER TANK: Not included in scope of delivery Construction : Concrete Constant level control : Included
ITEM 40: ONE WHITE WATER PUMP FOR DISC FILTER: Not included in scope of delivery Capacity : Consistency : White water Motor : 30 kW
ITEM 41: ONE WHITE WATER PUMP PRESSURE 1: Not included in scope of delivery Capacity : 450 M3/H Consistency : White water Motor : 37 kW
ITEM 42: ONE WHITE WATER PUMP PRESSURE 2: Not included in scope of delivery Capacity : 250 M3/H Consistency : White water Motor : 55 kW
ITEM 43: ONE HIGH DENSITY TOWER: Not included in scope of delivery Capacity : 60 m3 Consistency : 15% Construction : Concrete Dilution system : Included ø80 Agitator : Included Motor : 15 kW
ITEM 44: ONE TRANSFER PUMP TO PM: Not included in scope of delivery Capacity : 4 t/h Consistency : 4% Motor : 15 kW
ITEM 45: ONE PUMP H2SO4: Not included in scope of delivery Motor : 0,55 kW
ITEM 46: ONE DILUTION HD PUMP: Not included in scope of delivery Consistency : White water Motor : 11 kW
ITEM 47: ONE FRESH WATER PUMP: Not included in scope of delivery Consistency : N/A Motor : 9 kW
ITEM 48: ONE STORAGE FOR REJECTS: Not included in scope of delivery Construction : Concrete Automatic constant level : Included
ITEM 49: ONE DOSING STORAGE REJECT: Not included in scope of delivery Material : Stainless steel Automatic constant level : included
TEM 50: ONE REJECT PUMP: Not included in scope of delivery Capacity : 15,5 m3/h Consistency : 1,2% Motor : 7,5 kW
ITEM 51: ONE REJECT SCREW PRESS: Not included in scope of delivery Type : Inclined Material : Stainless steel Motor : 5,5 kW
ITEM 52: ONE FOAM EXTRACTOR: Not included in scope of delivery Type : From deinking cells Material : Stainless steel Motor : 5 kW
ITEM 53: ONE FOAM SEPARATOR: Not included in scope of delivery Material : Stainless steel Feed chute : Included
ITEM 54: ONE REJECTS FOAM STORAGE: Not included in scope of delivery Construction : Concrete Automatic constant level : Included
ITEM 55: ONE REJECTS FOAM PUMP: Not included in scope of delivery Material : Stainless steel Model : Horizontal Type : screw Capacity : 12 m3/h Consistency : 8,8% Motor : 11 kW
MISCELLANEOUS: Miscellaneous equipment and accessories are available such as: □ Manual Valves □ Automatic Valves □ Agitators □ Dosing Systems □ Electrical Panels □ Control Desk □ Instrumentation and Control □ PLC System for specific equipment □ Steam Feeding System □ Spare Parts
Nota: The technical datas are given for information only. They will be confirmed after the Site checking engineering works
Commercial Part: Price specification: as is where is Payment conditions: 100 % after contract signing before delivery