|
Stock preparation:
1 pulper with conveyer, type HV-3,5, Papcel, working
consistency 7%, rotor «shark», stator separating screen Ø 4 mm, capacity 22 tpd.
1 vibrating screen, screening area 1,5 m2, screen holes Ø 3 mm
1 high density cleaner,
type HL, Papcel
1 turboseparator
4 low density cleaners, throughput of each 500 lpm., working consistency 1,0 – 1,2%
1 high pressure pump
1 vacuum pump
10 stock pumps
1 PM electric panel
1 pneumatic panel for the
reel
PM:
-
width on the reel 2 150 mm, speed 220 – 300 m/min.
(at 35 g/m2), grammage from 17 up to 40 g/m2, capacity 22 tpd at 35 g/m2
- opened headbox 2 200 mm, manual regulation
- wire part: breast table, 2 suction boxes, 4 opened water boxes, suction roll, automatic wire
regulation and wire stretching device, wire 2 350 х 14 500 mm
- 1 suction press, linear pressure 50 kg/cm2
- 1 Yankee-dryer (2004), Ø 2 500 х 2 310 mm, steam, temperature 190°С, volume 9,25 m3, hardness 249 – 260 НВ, wall thickness 40 mm, working pressure 0,4 MPa, max.pressure 0,7
MPa, test-pressure 1,05 MPa
- 1 closed hood
- 1 «Pope» reel
|
