square29_gray_2.gif SPECIALTY

    Greater through put at reduced pressure drop while maintaining cleaning efficiency saves energy.
    Improved treatment capacity by 50% comparing with old 606H cleaner. Moreover, it is with nylon glass fiber which guarantees long service life.
    The inlet and outlet are located on top side and can seal with O-RING, and guarantees simplified slip-fit installation.
    Adapted special cyclone FRC for collection of fibers instead of old way of stock saver so that controls the reject quantity according to the small number of cleaners and can save the operation cost.

 

TOP INLET HEAD

Á¾·¡ÀÇ CLEANER HEAD

 square29_gray_2.gif The rate of reject depends on the diameter of orifice and the rates of rejects are  shown below.

Model

Reject rate

Without air suction

With air suction

Opening area

#620 Type

15%
20%

34.9Ø
38.1Ø

38.1Ø
44.5Ø

119%
136%

#606 Type

15%
20%

12.7Ø
15.9Ø

22.2Ø
25.4Ø

306%
255%

 square29_gray_2.gif SPECIFICATION

    1.¡âP = 1.5 - 1.8kg/cm2
    2.Q = 580 §¤/min
    3.Under Flow Nozzle (2-1/2" or 4") is made of ceramic 
       which is a kind of oxidized aluminium.
    4.Possible to control reject quantity by stock saver or  special cyclone FRC (New material) for fiber collection.

 

   square29_gray_2.gif The quantity of heavy rejects depends on the difference of pressures. Specification

Specification

#606TI

#623-4EH

Quantity

580/min

2180/min

Inlet diameter

50A (2.33 x 10 m2)

100A (9.16x10 m2)

Inlet quantity

5.28m/sec

5.05m/sec

Cleaner diameter

6''

12''

Cleaner semidiameter

0.0762m

0.1524m

Speed (V/R)

5.28/0.0762 = 69.3 (1/S)

5.05/0.1524 = 33.1 (1/S)

The centrifugal force (MR W2)

1x0.0762x69.3z/9.8 = 37.3G

1x0.0762x69.3z/9.8 = 37.3G

 

 

SPACE SAVER

     AHLSTOROM DECULATOR CLEANER SYSTEMS